Rigid Pins are used to test bare circuits, i.e. without mounted components; they do not have a spring and barrel, but are simply composed of a single rigid part. They have the function of connecting the PCB (Printed Circuit Board) circuits with the electronics of the test machine, like the normal Spring Probe.
They are available in various total lengths, diameters and types of heads and can be customized according to the needs of the order.
Thanks to their small diameter, Rigid Pins can be installed in very close pitches.
Among those we produce, Rigid Pins have a diameter of 0.3 mm and a length up to 90 mm.
The current rating carried by the Rigid Pins is up to 3A.
The typical contact resistance of a Rigid Pin is 30 mΏ.
The materials used to produce our Rigid Pins are:
To guarantee high conductivity, low resistance and good hardness, thus reducing the possibility of twisted pins.
To provide less electrical conductivity, but greater mechanical strength and thus record a longer life cycle duration of the Rigid Pin.
The heads of the commonly used Rigid Pins are numbers 02, 05, 11, 13. In addition, various other shapes are always available according to the needs and requirements of the customer.
The insulating plastic head, on the other hand, is usually used as protection.
Orari commerciale e tecnico: dalle 9 alle 13 - dalle 14 alle 17.30
P.IVA 03780900233
